
Tärkeimmät tekniset tiedot
-
Measurement range
0.004 to 30 mg/l
0.05 to 330 %SAT
0.1 to 700 hPa -
Process temperature
0 to 140 °C
(32 to 284 °F) -
Process pressure
0.02 to 13 bar abs
(0 to 190 psi)
Käyttöalue
Memosens COS81D is the ideal oxygen sensor for hygienic applications such as fermentation and inertization. Its precise, long-term stable measurements and its permanent self-monitoring ensure the most reliable measured values to help meet your desired product quality and optimize product yield. Memosens COS81D is not the latest Memosens generation. To get information on the new Memosens COS81E sensor with extended functionality, click here.
Memosens COS81D measures oxygen in applications with high demands to sterility and hygiene such as:
Fermentation
Inertization
Drinking water production
With its international explosion protection approvals, such as ATEX and IECEx, the Memosens COS81D oxygen sensor is suitable for hazardous area use.
A pharma certificate of compliance with sensor serial number specified is available.
Edut
Hygienic design according to EHEDG and ASME BPE (incl. USP class VI and FDA compliance) avoids cross-contamination and fulfills all GMP and GLP requirements.
The sensor can be used in process applications as well as benchtop fermenters. Providing you with 100% measuring consistency from the first lab trials to the final scaled-up process and your process lab.
More process up-time than ever before thanks to sensor exchange within seconds: precalibrate the sensor in your lab and then swap it into your process with plug & play. It does not need polarization time and is immediately ready to measure.
A built-in reference LED compensates the ageing of the measuring LED. This ensures reliable measured values throughout your entire batch production.
Reduce your maintenance effort: Memosens COS81D does not have a difficult-to-handle electrolyte or sensitive membrane. Just exchange the sensor cap, perform a calibration and you are done.
Memosens COS81D stores important sensor and process data in its intelligent head. The Memobase Plus CYZ71D sensor management software can use all this data to document the complete sensor lifetime offering full traceability with minimal paperwork.
Suitable for CIP/SIP and autoclaving and approved for hazardous area use.
Videot
Extended-valikoima
-
Laadukkaat tuotteet
- Erinomainen toiminnallisuus
Tekninen suorituskyky
Helppokäyttöisyys

-
Helppokäyttöiset tuotteet
- Helppoja valita, asentaa ja käyttää
Tekninen suorituskyky
Helppokäyttöisyys
-
Standardituotteet
- Luotettavat, lujatekoiset ja helppoja huoltaa
Tekninen suorituskyky
Helppokäyttöisyys
-
Laadukkaat tuotteet
- Erinomainen toiminnallisuus
Tekninen suorituskyky
Helppokäyttöisyys
-
Erikoistuotteet
- Suunniteltu vaativiin sovelluksiin
Tekninen suorituskyky
Helppokäyttöisyys
Tuotekohtainen
FLEX-valikoima | Tekninen suorituskyky | Helppokäyttöisyys |
---|---|---|
Fundamental-valikoima Täytä perusmittaustarpeesi |
Tekninen suorituskyky
|
Helppokäyttöisyys
|
Lean-valikoima Käsittele ydinprosessejasi helposti |
Tekninen suorituskyky
|
Helppokäyttöisyys
|
Extended-valikoima Optimoi prosessisi innovatiivisilla teknologioilla |
Tekninen suorituskyky
|
Helppokäyttöisyys
|
Xpert-valikoima Hallitse haastavimmatkin sovelluksesi |
Tekninen suorituskyky
|
Helppokäyttöisyys
Tuotekohtainen |
-
-
Tekniset tiedot (TI)
TI Memosens COS81D
Hygienic, optical sensor for measuring oxygen
EN FI 01/08/202328/07/202014/09/201731/01/2015Kieli:
Englanti
Versio:
01/08/2023
Tiedoston koko:
1.6 MB
Tiedoston nimi:
TI01201CEN_0423-00.pdf
-
-
-
Käyttöohje (BA)
BA Memosens COS81D
Hygienic, optical sensor for measuring oxygen
EN FI 01/08/202311/08/202030/04/201814/09/201730/09/2015Kieli:
Englanti
Versio:
01/08/2023
Tiedoston koko:
2.2 MB
Tiedoston nimi:
BA01448CEN_0523-00.pdf
-
-
-
Lyhyt ohje (KA)
Memosens COS81D
Memosens-teknologialla varustettu optinen anturi liuonneen hapen mittaukseen
EN FI 28/07/202030/04/201831/08/201731/10/2016Kieli:
Suomi
Versio:
28/07/2020
Tiedoston koko:
627.3 KB
Tiedoston nimi:
KA01273CFI_0420.pdf
-
-
-
Asennusohjeet (EA)
Kit COV81
For the maintenance of COS81D/E sensors
EN FI 14/12/2022Kieli:
Englanti
Versio:
14/12/2022
Tiedoston koko:
925.5 KB
Tiedoston nimi:
EA01460CEN_0122-00.pdf
-
-
-
Asennusohjeet (EA)
COV81 Installation Instructions
Maintenance kit for COS81D
EN FI 21/09/201730/11/2016Kieli:
Englanti
Versio:
21/09/2017
Tiedoston koko:
234 KB
Tiedoston nimi:
EA01189CA2_0217.pdf
-
-
-
Erikoisasiakirjat (SD)
SD Hygienic applications
Liquid analysis equipment
EN FI 29/08/202330/04/2021Kieli:
Englanti
Versio:
29/08/2023
Tiedoston koko:
512.7 KB
Tiedoston nimi:
SD02751CEN_0223-00.pdf
-
-
-
Esite (CP)
Aus Freude an gutem Wasser
Frische Ideen für Wasserwerke, Verteilernetze, Oberflächenwasser und Industrieanlagen
Kieli:
Saksa
Versio:
14/07/2023
Tiedoston koko:
2.1 MB
Tiedoston nimi:
CP01335CDE_0223_Kompetenz in Wasser.pdf
-
-
-
Esite (CP)
For the love of quality water
Fresh ideas for waterworks, distribution networks, surface waters and industrial plants.
Kieli:
Englanti
Versio:
14/07/2023
Tiedoston koko:
2 MB
Tiedoston nimi:
CP01335CEN_0223_Competence in water_LoRes.pdf
-
-
-
Sovellusesimerkki (CS)
Mesure d’oxygène dans une installation d’inertage
Memosens COS81D augmente la sécurité des process et réduit les coûts
Kieli:
French
Versio:
04/03/2020
Tiedoston koko:
1.3 MB
Tiedoston nimi:
CS01631CFR-0120-Proviron.pdf
-
-
-
Sovellusesimerkki (CS)
Sauerstoffmessung in einer Inertisierungsanlage
Sauerstoffmessung in einer Inertisierungsanlage: COS81D erhöht Prozesssicherheit und senkt Kosten
Kieli:
Saksa
Versio:
04/03/2020
Tiedoston koko:
1.4 MB
Tiedoston nimi:
CS01631CDE_COS81D_Proviron.pdf
-