Analog pH sensor
Ceratex CPS31

The pH-value of a liquid can be calculated using the potentiometric measurement principle. This video shows what it is about and how this measuring principle works.

Glass electrode for application in drinking water and swimming pools

Ceratex CPS31 is the analog expert for pH compensation in disinfection processes. Its three diaphragms make it suitable for minimum conductivity while its low drift guarantees stable measurement. The sensor makes sure that swimming pool water is agreeable and drinking water tasteful.

Lisää ostoskoriin
Konfiguroi
Mitoita
Hinnat kirjautumisen ja konfiguroinnin jälkeen

Vertaile

Lisäkomponentit

Memograph M RSG45
Advanced Data Manager

Saves, visualizes, analyzes and communicates
Lisätietoja
Vertaile
RNB130
Primary switched-mode power supply for DIN rail

Power supply for one 4 wire sensor or transmitter.
Lisätietoja
Vertaile
Ecograph T RSG35
Universal Graphic Data Manager

Paperless recording, visualization and monitoring of the process values at the same time
Lisätietoja
Vertaile
RN221N
Active barrier with optional HART® diagnosis

Active barrier with power supply for safe separation of 4...20 mA current circuits
Lisätietoja
Vertaile

Edut
Reliable measurement at minimum conductivity thanks to three diaphragms
Low drift by very low level of ion depletion in electrolyte
Optional salt ring for extended operating time

Käyttöalue
Drinking water
Swimming pool water
pH compensation for free chlorine measurement

Ominaisuudet ja tiedot

Takaisin

Yksityiskohtaiset tiedot

Mittausperiaate

Glass electrode
Application

Drinking water and swimming pool water, pH compensation to measure free chlorine
Characteristic

Standard applications in water, long lifetime
Measurement range

pH 1 - 12
Measuring principle

Gel filled reference with one or three diaphragms, option saltring
Design

Shaft length 120 mm, with or w/o temperature sensor
Material

Glass / Ceramics
Dimension

Shaft length 120 mm
Process temperature

0 - 80 C (32 - 176 F)
Process pressure

1 - 4 bar abs (15 - 60 psi)
Temperature sensor

None or Pt 100
Ex certification

No
Connection

GSA or Top 68
Ingres protection

IP68

Näytä lisää
Näytä vähemmän

Asiakirjat / käsikirjat / ohjelmisto

Lataa tyyppi

Technical Information CPS31D/CPS31
pH electrodes with ceramic-diaphragm and gel filling

Technical Information (TI)
pH 測定セレクションガイド
産業プロセスにおける pH 測定

Competence Brochure (CP)

08/15

Japani
CP00010C pH measurement in industrial processes for US market
Selection and engineering guide for your industry and application

Competence Brochure (CP)

04/15

Englanti
Measurement and control aspect of pH using inductively coupled with bidirectional Memosens technology in flue gas desulfurization process
White Paper CP971C pH measurement and control in a power utility is an
integral part of process. The scrubber efficiency is highlydependent on
the pH. Numerous opportunities were revealed for saving time, as well as
the cost and materials in power plants. In afossil fuel power plant,
the
chemical energy stored in coal, oil, natural gas, shale oil, oxygen and
air
is converted into thermal, mechanical and finally into electrical
energy. In
other words, water is heated to steam, which spins a steam turbine. The
steam turbine drives an electrical generator.

Competence Brochure (CP)

04/11

Englanti
CP01202C pH Sensors:Calibrate, clean, perform a calibration check or...?
This white paper will address
Knowing when to do a pH sensor calibration versus a calibration
check
How to properly clean a pH sensor
How to perform a pH sensor calibration
A decision tree for step by step guidance

Competence Brochure (CP)

02/12

Englanti