CCS120 is the analog sensor for standard measurement of total chlorine. It delivers reliable values even if fluctuations in flow or conductivity occur and allows control of the disinfection loop so that the water is free of germs. At the same time, the sensor is designed for long calibration and service intervals reducing your maintenance effort.
CCS120 measures total chlorine in:
Drinking and process water - Process and distribution networks - Monitoring, control and optimization of disinfection processes
Wastewater treatment plants - Disinfection monitoring and control in wastewater outlet - Reuse of outlet water
Utilities of all industries - All disinfection measuring points
Edut
Recalibration intervals approx. 1 to 3 months under constant operating conditions
Easy membrane replacement thanks to prefabricated membrane cap
Measured values are not affected by conductivity fluctuation
Measurement virtually independent of flow rate in the range above 30 l/h
Endress+Hauser enables fast and reliable water analysis at Butoniga Reservoir, ensuring optimal layer selection, improved water quality and reduced operating costs.
Tampereen Vesi luottaa Endress+Hauserin mittauksiin ja palveluihin sekä talousveden tuotannossa että jätevedenpuhdistuksessa. Tesoman vesitornissa käyttöönotettu analyysipaneeli on ensimmäinen laatuaan Suomessa.
AVR Waste Botlekissa Rotterdamissa prosessoi jopa 1,7 miljoonaa tonnia jätevettä vuodessa. Tutustu, miten yritys optimoi pH-mittauksensa Endress+Hauserin avulla
- Total chlorine consists of free chlorine (HOCl, OCl) and bounded chlorine (chloramines). - A constant polarisation voltage between working and counter electrode instigates the electrochemical reaction. - Only slightly pH dependent.
Design
Closed amperometric two electrode sensor for continuous measurement of total chlorine.
Käytämme evästeitä parantaaksemme selauskokemustasi, kerätäksemme tilastoja sivuston toiminnan optimoimiseksi ja toimittaaksemme räätälöityjä mainoksia tai sisältöä.
